GoVideo R6750 Product Manual

Page of 44
 
29
Basic Recording
Recording from TV
Follow these steps to record a TV show to 
DVD.
Insert a blank DVD+R or DVD+RW 
disc into the disc tray.
•  Press OPEN/CLOSE to open and 
close the disc tray.
•  When you insert a blank disc, the 
DVD Recorder will format (or “initial-
ize”) the disc automatically.
Press GUIDER   to display the “Easy 
Guider” menu.
Use  to select “Record”, then press 
ENTER.
Use  to select “TV”, then press 
ENTER.
Use  to select the channel you 
want to record, then press ENTER.
•  If you are using a cable box/satellite 
receiver, set the DVD recorder to the 
receiver’s output channel (2, 3 or 4) 
and select the desired channel on 
the cable box/receiver.
Select the desired recording quality 
and press ENTER.
HQ (best) – 1 hour/disc
SP (better) – 2 hours/disc
EP (good) – 4 hours/disc
SLP (fair) – 6 hours/disc
Press ENTER to start recording.
•  To pause recording, press PAUSE.
•  To resume recording, press PAUSE 
again.
•  To view the status of your recording, 
press DISPLAY.
When finished, press STOP to stop 
recording.
•  The disc is updated with the new 
recording. This may take a few min-
utes to complete.
•  To watch your recording, see page 
32.
•  To finalize your disc to play on other 
DVD players, see page 37.
Playback
Erase
Record
Finalize
EXIT
EXIT
TV
S-Video
DV
AV1
AV2
EXIT
25
CH
1hr  HQ
2hr  SP
4hr  EP
6hr  SLP
EXIT
 
4 - Operations
 
NOTE:
•  You cannot change channels or 
record quality during recording.