GoVideo R6750 Product Manual

Follow these steps to record from a VCR, 
camcorder, or other external device.

Connect your external device to the 
front panel or rear panel inputs; see 
pages 18-19.

Insert a blank DVD+R or DVD+RW 
disc into the disc tray.
•  Press OPEN/CLOSE to open and 

close the disc tray.

Press INPUT repeatedly to select:
AV1-Front - For a device connected 
to the front Audio/Video Input.
AV2-Rear - For a device connected to 
the rear Audio/Video Input.
S-Video - For a device connected to 
the rear S-Video Input.
DV - For a device (such as a digital 
camcorder) connected to the front 
DV Input with a DV cable.

Set the desired Record Quality.
•  Press SETUP, then select 

Record>Quality; see page 25 for 
details.

Cue the device and start playback at 
the beginning of the scene you wish 
to record.

Press REC to start recording.
•  To pause recording, press PAUSE.
•  To resume recording, press PAUSE 

again.

When finished, press STOP to stop 
recording.
•  The disc is updated with the new 

recording. This may take a few min-
utes to complete.

•  To watch your recording, see page 

32.

•  Connect a DV-compatible camcorder 

to the front panel DV jack with a IEEE-
1394 4-pin DV cable (not included).

•  A single DV cable is used for input 

and output of audio, video, data, and 
control signals.  

•  After recording stops, a DV control 

bar appears on screen:

•  You can use this control bar to Stop, 

Play, Pause, Fast-Forward, and Rewind 
the DV camcorder using your DVD 
Recorder remote control.