GoVideo R6750 Product Manual

SYMPTOM

CAUSE

SOLUTION

Picture or sound of broadcasting 
channel is weak or missing. 

Antenna or cables are loose. 

Tighten connections or replace cable. 

Wrong TV Signal is selected in the 
DVD Recorder Setup menu. 

See “TV Signal” on page 27.

Camcorder image via A/V input 
or DV IN to DVD Recorder is not 
shown on TV screen.

Camcorder is off. 

Turn camcorder on and operate 
properly. 

DVD Recorder’s input is not set to 
AV1-Front, AV2-Rear, S-Video, or DV. 

Press INPUT to select the correct 
input. 

Can’t play disc recorded on this 
DVD Recorder on another DVD 
player. 

The DVD+R disc was not finalized. 

Finalize the disc; see page 37. 

Some players will not play even a 
finalized disc. 

No solution. 

Cannot record or did not record 
successfully. 

The remaining blank space on the 
disc is insufficient. 

Use another disc. 

The source you are trying to record is 
copy- protected.

You cannot record the source. 

When setting the recording channel, 
the channel is tuned to the TV’s own 
tuner.

Select the channel on the DVD 
Recorder’s built-in TV tuner. 

Timer Recording does not work. 

DVD Recorder is not set to the 
correct time. 

Set date and time; see page 22.

Timer has been programmed 
incorrectly. TIMER indicator light does 
not appear after programming timer.

Reprogram Timer; see page 31. 

DVD Recorder is on.

Turn off the DVD Recorder.

Stereo Audio Recording and/or 
Playback not present. 

TV is not Stereo-compatible. 

No solution. 

Broadcast program is not in stereo 
format. 

No solution. 

DVD Recorder A/V Out jacks are not 
connected to TV A/V In jacks. 

Make A/V connections. Stereo is 
available only via A/V output from 
DVD Recorder. 

DVD Recorder Audio/Video Out is not 
selected for viewing at the TV. 

Select AUX or A/V source as TV input. 

Remote control does not work 
properly. 

The remote control is not pointed 
at the remote sensor of the DVD 
Recorder. 

Point the remote control at the 
remote sensor of the DVD Recorder. 

The remote control is too far from the 
DVD Recorder. 

Operate the remote control within 
10 ft (3 m). 

There is an obstacle in the path of 
the remote control and the DVD 
Recorder. 

Remove the obstacle. 

The batteries in the remote control 
are exhausted.

Replace the batteries with new ones.