Exabyte 1005911-003 User Manual

March 2002

Page 5 of 12

3  Removing the drive’s service access cover

3. Remove the drive carrier by grasping the handle and pulling it straight 

out of the library. The drive carrier weighs about 5 pounds; make sure 
you support the bottom of the carrier as you remove it.

Follow these steps if you are installing a tape drive in an empty slot.

1. From the back panel, use a #2 Phillips screwdriver to release the two 

captive screws that secure the service access cover to the library.

2. When the screws are loosened, remove the drive access cover.

Captive screws