Exabyte 1005911-003 User Manual

Page 6 of 12

1005911

4  Installing the tape drive

1. Insert the tape drive so that the handle is at the top and the fan is at the 

bottom, as shown in the following figure.  The drive should slide easily 
toward the front of the library.

2. Tighten the captive screws on each end of the drive carrier to 

8.0 inch-pounds (9.2 kg-cm) of torque. 

Do not install a mixture of Fibre Channel and SCSI tape 
drives in the library.  Mixing drive interfaces could 
cause data loss.