Emerson Liebert PSA Line-Interactive UPS 500-1500VA User Manual
Running Liebert MultiLink
80
Liebert
®
MutiLink
®
9.3
Using the UPS Control—Contact Closure
The UPS Control in the Contact Closure setup permits you to turn off the UPS output. This feature
requires a special cable and is available only on certain UPS models. Contact Emerson Technical
Support for information.
To open the UPS Control dialog box and turn off the UPS output:
• Click on the Overview tab.
• Right-click on the UPS device name to open a pop-up menu, then click on UPS Control.
• Right-click on the UPS device name to open a pop-up menu, then click on UPS Control.
• To turn off power to the critical load, click on the Turn UPS Output Off button.
!
WARNING
Turning the UPS output off is not recommended. All loads plugged into the UPS will lose
power within two (2) minutes. This may require a manual shutdown of your computer
network.
Right-click
to display
pop-up
menu . . .
. . . to open the UPS Control box.
. . . then click on
UPS Control . . .