Emerson Liebert MC Microchannel Outdoor Condenser 28 - 220kW User Manual
System Maintenance
59
Liebert
®
MC
™
9.4.3 Maintenance Inspection Checklist
Notes
Date:
Prepared By:
Model #:
Serial Number:
NOTE
Regular inspections are necessary to ensure that the cooling fins are clean. Should inspection
Regular inspections are necessary to ensure that the cooling fins are clean. Should inspection
reveal dirt or corrosion, appropriate cleaning should be performed.
Monthly
Semiannually
Condenser
___ 1. Coil surfaces free of debris.
___ 2. Fans free of debris.
___ 3. Fans securely mounted.
___ 4. Motor bearings in good condition.
___ 5. Check all refrigerant lines and capillaries
___ 2. Fans free of debris.
___ 3. Fans securely mounted.
___ 4. Motor bearings in good condition.
___ 5. Check all refrigerant lines and capillaries
for vibration isolation. Support as
necessary.
___ 6. No refrigerant leaks.
Surge Protection Device (If Installed)
___ 1. Check SPD protection status indicator
lights.
Condenser
___ 1. Complete all monthly items.
___ 2. Piping in good condition.
___ 3. Inspect refrigerant lines for signs of oil
___ 2. Piping in good condition.
___ 3. Inspect refrigerant lines for signs of oil
leaks. Repair leaks as found.
___ 4. Check refrigerant charge level in each
receiver tank (if required), based on
procedures in the indoor unit’s manual.
Continuous system operation required.
___ 5. Wash coil as needed.
___ 6. Repair bent or damaged fins.
___ 6. Repair bent or damaged fins.
Condenser Electrical Panel
___ 1. Check all electrical connections.
___ 2. Check contactors for pitting.
___ 3. Operational sequence/set points.
___ 2. Check contactors for pitting.
___ 3. Operational sequence/set points.
Fan Motors
___ 1. Motor # 1 amp draw amps
___ 2. Motor # 2 amp draw amps
___ 3. Motor # 3 amp draw amps
___ 4. Motor # 4 amp draw amps
___ 2. Motor # 2 amp draw amps
___ 3. Motor # 3 amp draw amps
___ 4. Motor # 4 amp draw amps
Signature
Make photocopies of this form for your records.