Elsa Cable User Manual
Description of the menu options
ELSA MicroLink Cable
R10
1
Network masks and IP addresses of 0.0.0.0 can be used as “wildcards“. Specified
computers and networks may be simultaneously subjected to targeted filtering while
others pass the router unfiltered.
computers and networks may be simultaneously subjected to targeted filtering while
others pass the router unfiltered.
The tables are processed from top to bottom. As soon as a matching filter is found, the
packet is handled accordingly.
packet is handled accordingly.
Setup/SNMP-module
This menu allows you to enter settings for configuration of the device via SNMP. The
menu has the following layout:
menu has the following layout:
Send-Traps
This entry controls trap output (No/Yes).
IP -Trap-Table
Specifies the IP addresses to which the trap messages will be sent.
Administrator
Administrator's name
Location
Device location
Setup/DHCP-server-module
This menu allows you to enter settings for the DHCP server. The menu has the following
layout:
layout:
Operating
On: The device operates as a DHCP server.
/SNMP-module
SNMP module settings
Send-Traps
Switch for issuing SNMP traps
IP-Trap-Table
Table with 20 destination addresses for trap messages
Administrator
Device administrator
Location
Device location
/DHCP-server-module
DHCP server settings
Operating
Switch for activating the DHCP module
Start-address-pool
Start address for the address pool
End-address-pool
End address for the address pool
Netmask
Network mask for the address pool
Broadcast-address
Broadcast address for the LAN
Max.-lease-time-minute(s)
Maximum period of validity for the address assignment
via DHCP
via DHCP
Default-lease-time-minute(s)
Default period of validity for the address assignment via
DHCP
DHCP
Table-DHCP
Table of current assignments via DHCP