Elsa Cable User Manual

Default-lease-
time-minute(s)

Here you can enter the period of validity that is assigned if the host makes no request. 

The DEFAULT value of 500 minutes equals approximately 8 hours.

Table-DHCP

In the DCHP module, the 'Table-DCHP' option allows you to verify (or look up) the
assignment of IP addresses to the relevant computers. This table has the following
layout:

K

IP-address: IP address assigned

K

Node-IP: The computer’s Ethernet address

K

Timeout: Time remaining until the assignment becomes invalid

K

Hostname: The computer’s name in plain text if it was transmitted in the request

K

Type: This field contains additional information on the assignment.

The 'Type' field specifies how the address was assigned. This field can assume the
following values: 

– new: The computer has made its initial request. The DHCP server verifies the

uniqueness of the address that is to be assigned to the computer.

– unkn.: While verifying uniqueness, it was determined that the address has

already been assigned to another computer. Unfortunately, the DHCP server has
no means of obtaining additional information on this computer.

– stat.: A computer has informed the DHCP server that it has a fixed IP address.

This address can no longer be used.

– dyn.: The DHCP server assigned an address to the computer.

This menu allows you to enter settings for router configuration options. The menu has
the following layout:

10.1.1.10

00a0570308e1

500

ELSA

new

Password-required

Password required on/off if there is no password

Switch-Off-mode

Configuration of the On/Standby switch

Standby

Standby status  

Config-aging-minute(s)

Time limit for remote configuration connections