Elsa Cable User Manual
Configuration modes
ELSA MicroLink Cable
19
English
Configuration commands
Enter commands and path specifications using the normal DOS or UNIX conventions if
you are using telnet or a terminal program to configure the device.
you are using telnet or a terminal program to configure the device.
Enter a forward slash or backslash to separate the path specifications. You do not need
to write out commands and table entries in full; an unambiguous abbreviation will do.
to write out commands and table entries in full; an unambiguous abbreviation will do.
The entries for the categories MENU, VALUE, TABLE, TABINFO, ACTION and INFO will
be displayed while configurations are made and may be modified. You can use the
following commands to do this:
be displayed while configurations are made and may be modified. You can use the
following commands to do this:
This command ...
... means this ...
... for instance:
? or help
Calls up help text
-
dir, list, ll, ls <MENU>,
<VALUE> or <TABLE>
<VALUE> or <TABLE>
Displays the contents of MENU,
VALUE or TABLE
VALUE or TABLE
dir/status/wan-statistics displays the
current WAN statistics
current WAN statistics
cd <MENU> or <TABLE>
Switches to the MENU or TABLE
specified
specified
cd setup/tcp-ip-module (or cd se/tc
for short) switches to the TCP/IP mod-
ule
for short) switches to the TCP/IP mod-
ule
set <VALUE>
This resets the VALUE.
set IP-address 192.110.120.140 sets a
new IP address
new IP address
Insert a space between all
entries in table rows. An *
leaves the entry unchanged.
entries in table rows. An *
leaves the entry unchanged.
set /setup/name AACHEN assigns
the name 'AACHEN' to the device.
the name 'AACHEN' to the device.
set <VALUE> ?
Shows you which values can be
specified here
specified here
del <VALUE>
Deletes a table row.
del /se/wan/nam/AACHEN
Deletes the entry for the remote sta-
tion AACHEN.
Deletes the entry for the remote sta-
tion AACHEN.
do <ACTION>
(parameters)
(parameters)
Executes the ACTION according
to any parameters specified,
to any parameters specified,
do /firmware/firmware-upload starts
the upload of new firmware.
the upload of new firmware.
passwd
Allows a new password to be
specified. The old password, if
there is one, must be entered
first. The new password must
then be entered twice and con-
firmed each time with
specified. The old password, if
there is one, must be entered
first. The new password must
then be entered twice and con-
firmed each time with
y.
repeat <sec> <ACTION>
Repeats the ACTION at an inter-
val of the number of seconds
specified. Any key can be used
to terminate the repetition.
val of the number of seconds
specified. Any key can be used
to terminate the repetition.
repeat 3 dir/status/wan-statistics
displays the current WAN statistics
every 3 seconds
displays the current WAN statistics
every 3 seconds
time
Sets the system time and date.
time 24.12.1998 18:00:00
language <language>
Sets the language for the cur-
rent configuration session.
rent configuration session.
Languages currently supported:
English (language english)
German (language deutsch)
English (language english)
German (language deutsch)
exit, quit, x
Configuration is terminated.