CTC Store IPDSLAM-A8/A16 User Manual

 
 

                                                                 

 

80 

Describes how to show the Administration, operating, alarm and trap status. 

Argument List: 

Parameter Description 
all 

Show all information. 

port no. 

  (1 ~ 16). Indicate the specific port.   

Example: This example shows how to display the current status of port 8. 

IPDSLAM # show port 8 
1. Port ID: 1/8 
2. Admin Status: up 
3. Operating Status: up 
4. Alarm Status: Normal 
5. Trap: disable 

The following example shows how to display the all port status. 

IPDSLAM # show port all 
 
 Port ID  Admin Status  Operating Status      Alarm Status      Trap 
---------------------------------------------------------------------------------------- 
    1                  up                      up                          Normal            enable 
    2                  up                      up                          Normal            enable 
      .                                      …                                            …                   
  16                  up                      up                          Normal            enable 
---------------------------------------------------------------------------------------- 
Press ‘y’ for continue, ‘n’ for break and press Enter. 

 

Table 4-12    “show port” Field Definition 

Items Description 
Port ID 

The specific ADSL IP DSLAM port no (port no.).

Admin Status 

The desired state of interface (up/down) 

Operating Status 

The current operational state of interface 
(up/down) 

Alarm Status 

Alarm status…normal means “no alarm” 

Trap enable/disable. 

Describes how to get the information of line coding, line type, standard 

compliance, channel mode and which line profile and alarm profile have 
attached at the specific ADSL line.