Furuno DOPPLER SPEED LOG DS-80 User Manual

1. Press the [*] key to open the contrast

adjustment dialog box.

CONTRAST (0~63)

EXIT: [ENT]

41

2. Press the Omnipad at   or   to adjust

the contrast. The setting range is 0 to 63

and the default setting is 48.

3.  Press the [ENT] key.

Note: The contrast is automatically set to

default (48) when the power is turned on.

1.  Press the [DIM] key to show the dimmer

adjustment dialog box.

DIMMER (1~8)

EXIT: [ENT]

7

2.  Press the Omnipad at   or   to adjust

the dimmer. The setting range is 1 to 8

and the default setting is 4.

3.  Press the [ENT] key to conclude.

Note: The [DIM] key is inoperative when

dimmer is controlled externally.

Press the [DISP] key to select display

desired. Each time the key is pressed the

display shows speed and distance run or

speed alone as below.

[DISP] key
to switch

SPEED                         STW         

DISTANCE                           

                                           nm

SPEED                          STW            

Speed

Distance
Run

Direction

: Fore
: Aft

kt

•

  Arrow indicates direction: 

 

indicates

fore;

 

, aft.

•

  The distance run indication shows the

total distance run in forward speed only.

•

  The distance run is backed up when the

power is turned off.

Note: Speed error may occur in rough seas

because of air bubbles, etc.

When speed error occurs, the speed

indication freezes, and “KT” is highlighted

and blinks. If speed error continues more

than 30 seconds, the speed indication

changes to **.*.