Manualsbrain.com
  1. Manuals
  2. Brands
  3. Furuno
  4. DOPPLER SPEED LOG DS-80
  5. User Manual

Furuno DOPPLER SPEED LOG DS-80 User Manual

Download
Page of 40
8
MENU
DISTANCE RUN DISPLAY 
DEMO
SYSTEM MENU
SYSTEM MENU2
                  
2. Press the Omnipad at 
  
 to select
DISTANCE RUN DISPLAY and press
the [ENT] key.
DISTANCE RUN DISPLAY
DATA DISPLAY 
        
CONTACT CLOSURE
RESET                        OFF
SET                        
                              0.00nm
ENT
SET
3. Select DATA DISPLAY and press the
[ENT] key.
DISTANCE RUN DISPLAY
DATA DISPLAY
CONTACT CLOSURE
RESET                       OFF
SET
                                                      0 . 0 0   nm
               
ENT
 SET
IEC61162(VLW)
CONTACT CLOSURE
4. Press 
  
 to select IEC 61162(VLW)
and press the [ENT] key.
5. Press the [MENU] key twice to close the
menu.
1.6.2 Adjusting distance run
Distance run can be changed when the
menu item DATA DISPLAY is selected to
CONTACT CLOSURE. It may also be
changed only at the display unit when IEC
61162(VLW) is selected. .
1. Press the [MENU] key to open the
menu.
2. Use 
  
 to select DISTANCE RUN
DISPLAY and press the [ENT] key.
3. Select SET and press the [ENT] key.
The cursor circumscribes the leftmost
digit of the distance run figure.
   
DISTANCE RUN DISPLAY
DATA DISPLAY
      CONTACT CLOSURE
RESET                        OFF
SET
                     000000.00nm
ENT
SET
Cursor
4. Press the Omnipad at   or   to select
the digit to change.
5. Press the Omnipad at 
 
 or 
 
 to
change value. The setting range is 0.00
nm to 999999.99 nm.
6. Press the [ENT] key followed by
pressing the [MENU] key twice to
conclude your selection and close the
menu.
1.6.3 Resetting distance run to zero
Distance run can be reset to zero when the
menu item DATA DISPLAY is selected to
CONTACT CLOSURE. It may also be reset
to zero only at the display unit when IEC
61162(VLW) is selected.
1. Press the [MENU] key to open the
menu.
2. Press the Omnipad at 
 
 to select
DISTANCE RUN DISPLAY and press
the [ENT] key.
3. Select RESET and press the [ENT] key.
DISTANCE RUN DISPLAY
DATA DISPLAY
      CONTACT CLOSURE
RESET                        OFF
SET
  
                             
OFF
ON
4. Press the Omnipad at 
 
 
 
 to select ON.