Fostex PD606 User Manual
144
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
The “Record FS&Bit” menu item sets the recording sampling frequency and bit length.
You can also make the setting via the quick setup mode on the Home screen.
The setting is stored to the Flash ROM of the unit.
You can also make the setting via the quick setup mode on the Home screen.
The setting is stored to the Flash ROM of the unit.
You can select from among the following:
44/16, 48/16, 44/24, 48/24, 88/24, 96/24, 176/24, 192/24 (the default is “48/24”)
Recording FS/bit length setting [Record FS&Bit]
4)
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
The current setting is shown in the status area on the Home screen.
3)
Use the [MENU] dial to select the “Record FS&Bit” menu item and press the [ENTER/YES]
key.
The current setting starts flashing and you can now select the desired option.
Options
1)
While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2)
While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
5)
Press the [EXIT] key repeatedly until you exit the MENU mode.
Flashing