Fostex PD606 User Manual
146
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
The “Rec source sel” menu item selects record sources in pairs.
Recording source setting [Rec source sel]
3)
Use the [MENU] dial to select the “Rec source sel” menu item and press the [ENTER/YES] key.
The display now shows the screen for selecting the record sources in pairs.
1)
While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2)
While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
5)
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
4)
Use the [MENU] dial to select a channel pair and press the [ENTER/YES] key.
The current selection starts flashing and you can now select the desired option.
You can select "Digital" or "Analog" for CH1-2, CH3-4 and CH5-6 (the default is "Digital"),
while you can select "Digital" or "ST BUS" for ST-LR (the default is "ST BUS").
while you can select "Digital" or "ST BUS" for ST-LR (the default is "ST BUS").
Options
The channel pair accepts the corresponding digital input signal from the [DIGITAL I/O] con-
nector and you can record the digital signal to the corresponding track pair.
nector and you can record the digital signal to the corresponding track pair.
Digital
Analog
The channel pair accepts the analog input signals from the corresponding [ANALOG MIC/
LINE INPUT] connectors and you can record the analog signals to the corresponding track
pair.
LINE INPUT] connectors and you can record the analog signals to the corresponding track
pair.
ST-LR
CH1-2, CH3-4, CH5-6
Digital
ST BUS
The channels accept digital input 7-8 signal from the [DIGITAL I/O] connector and you can
record the digital signal to the stereo L/R tracks.
record the digital signal to the stereo L/R tracks.
You can record the stereo buss signals (mixed signals of channels 1 through 6) to the stereo
L/R tracks.
L/R tracks.
Flashing