Fostex PD606 User Manual
75
Location Recorder Model PD606
Chapter 5: Recording/Playback
In this condition, rotating the [MENU] dial (or pressing the [
] or [
] key) moves
the flashing position in the following order.
2)
Select the desired item you want to edit and press the [ENTER/YES] key.
The current option of the selected item starts flashing and you can now select the
desired option using the [MENU] dial.
desired option using the [MENU] dial.
3)
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key.
The selected option is set and the item name flashes again.
Repeat steps 2) and 3) for setting another item if required.
Repeat steps 2) and 3) for setting another item if required.
4)
After completing settings, press the [EXIT] key to exit the quick setup mode.
For details about each item in the quick setup mode, see the following.
You can select the frame rate of LTC generated by the internal TC generator or external time
code.
code.
Frame rate selection for LTC (or external time code) [
]
The unit records LTC together with audio signals. By default, "01h 00m 00s 00f" is stamped
at the beginning (one-hour offset to ABS) and the generator records LTC jammed to this start
time code. The LTC recording mode ("TC GEN" mode) is set to "Rec Run" by default, so each
time you make audio recording, uninterrupted LTC is recorded. When you record an exter-
nal time code, set the frame rate to match the incoming time code.
You can set the time code frame rate also via the "Frame rate" menu item in the "TC SETUP"
menu of the MENU mode (see page 182 for details). You can edit the LTC start time via the
"Default LTC Start" menu item in the "TC SETUP" menu of the MENU mode. See page 190 for
details.
at the beginning (one-hour offset to ABS) and the generator records LTC jammed to this start
time code. The LTC recording mode ("TC GEN" mode) is set to "Rec Run" by default, so each
time you make audio recording, uninterrupted LTC is recorded. When you record an exter-
nal time code, set the frame rate to match the incoming time code.
You can set the time code frame rate also via the "Frame rate" menu item in the "TC SETUP"
menu of the MENU mode (see page 182 for details). You can edit the LTC start time via the
"Default LTC Start" menu item in the "TC SETUP" menu of the MENU mode. See page 190 for
details.
Available frame rate options (default: 25)
23 (23.97), 24, 25, 29.97DF, 29.97ND, 30DF, 30ND
You can select the system clock reference.
System clock reference selection [
]
To make recording with internal clock reference, select "INT" (default). To make the unit
lock to an external digital, word or video clock, select "DIGI", "WORD" or "VIDEO".
You can select the system clock reference also via the "Sync Clock" menu item in the "TC
SETUP" menu of the MENU mode (see page 181 for details).
lock to an external digital, word or video clock, select "DIGI", "WORD" or "VIDEO".
You can select the system clock reference also via the "Sync Clock" menu item in the "TC
SETUP" menu of the MENU mode (see page 181 for details).
Available clock reference options (default: INT)
INT, DIGI, WORD, VIDEO
Flashing