AMANO 4700/4800 Automatic Time & Date Stamp User Manual
2
4700/4800 Series Time Stamp Operation Manual
How To Operate
•
Connect the power cord to an electrical power source.
•
Insert the papers along the guide line of slide plate for automatic
printing (about 5 sheets, if back carboned slips, can be copied).
printing (about 5 sheets, if back carboned slips, can be copied).
How To Set The Typewheels
(Refer to Fig. 2, 3, & 5)
•
Remove the case, and turn the shaft holder [1] in the arrow
direction indicated in Figure 2 to detach it from the shaft [2].
direction indicated in Figure 2 to detach it from the shaft [2].
•
Next pull out the shaft [2] in the arrow direction indicated in
Figure 2, and set up the typewheel and clock sections as shown
in Figure 3.
Figure 2, and set up the typewheel and clock sections as shown
in Figure 3.
To Set the 4700 Series (Year, Month, Date, Time)
•
Keeping the electrical cord to A.C. main, push the minute
advance lever [5] as shown in Figure 5, in the arrow direction,
then turn the typewheels [3] for year, month, date, hour and
minute in the direction of the arrow shown in Figure 3 and set
one minute before the desired time.
advance lever [5] as shown in Figure 5, in the arrow direction,
then turn the typewheels [3] for year, month, date, hour and
minute in the direction of the arrow shown in Figure 3 and set
one minute before the desired time.
Figure 2.
Clock Face
Shaft Holder
1
Shaft
2