AMANO 4700/4800 Automatic Time & Date Stamp User Manual
4700/4800 Series Time Stamp Operation Manual
3
•
On releasing the minute advance lever [5], the minute
typewheel advances one minute to synchronize with the desired
time.
typewheel advances one minute to synchronize with the desired
time.
To Set the 4800 Series
Model 4850 …4 digit numbers (Year, Month, Date, Hours & Minute)
Model 4850 …5 digit numbers )Month, Date, Hours & Minute)
Model 4850 …5 digit numbers )Month, Date, Hours & Minute)
•
The numbers will be changed automatically upon each printing.
•
To set the desired number, operate the number wheel advance
lever [14] as illustrated in Figure 5.
lever [14] as illustrated in Figure 5.
Caution: When setting the typewheel by the minute advance lever [5],
right after the cam dropped the cam follower to advance one
minute, the typewheel can not be moved by hand and so, wait
for about 15 seconds, and then repeat the operation!
minute, the typewheel can not be moved by hand and so, wait
for about 15 seconds, and then repeat the operation!
How To Set The Clock
(Refer to Fig. 4 & 5)
•
Turn the clock advance gear [4] to set the clock.
Caution: The clock advance gear can be turned in either the right or left
direction!
•
To set the typewheel and clock hands to the same time, first set
the typewheel to the desired time, then set the clock by turning
the clock advance gear [4] to the time of the typewheel until a
tick sound is heard.
the typewheel to the desired time, then set the clock by turning
the clock advance gear [4] to the time of the typewheel until a
tick sound is heard.
Clock Face
Typewheels
3
Figure 3.