Alfa Romeo 159 Owner's Manual
243
SAFETY
DEVICES
W
ARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
TECHNICAL
SPECIFICA
TIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
CAR
MAINTENANCE
SPRAY NOZZLES
If the jet of fluid is missing, firstly check
that there is fluid in the reservoir: see
“Checking fluid levels” in this section).
that there is fluid in the reservoir: see
“Checking fluid levels” in this section).
Then check that the nozzle holes are not
clogged, if necessary use a needle.
clogged, if necessary use a needle.
Fluid jets shall be directed at about 1/3
height from the window upper edge.
height from the window upper edge.
HEADLIGHT WASHERS
Regularly check that the spray jets are
intact and clean.
intact and clean.
The headlight washers are automatical-
ly switched on when the windscreen
washer is operated and the dipped
beams are on.
ly switched on when the windscreen
washer is operated and the dipped
beams are on.
Changing the windscreen
wiper blades fig. 19
wiper blades fig. 19
How to remove the blade:
– raise the windscreen wiper arm
A;
– turn the blade
B by 90° around pin
C, on the final section of the arm;
– remove the blade from the pin
C.
How to refit the new blade:
– fit pin
C into the hole in the middle
of the blade
B;
– refit the arm with the blade on the
windscreen.
windscreen.
A0E0080m
fig. 19
223-248 Alfa 159 GB 3-12-2009 14:11 Pagina 243