ADIC Webcam 2.8 User Manual

The Configuration Wizard screen (

 on page 23) is shown with a Completed status 

next to Step 2. Click Next to continue with 

.

Step 3: Adding a Library

Use the procedure in this section to add libraries to StorNext. The StorNext Storage Manager (SNSM) 
component of StorNext supports three types of libraries: SCSI, Network (ACSLS or DAS), and Vault.

• SCSI button: Select SCSI if you have a SCSI or a fibre channel-attached library. 

• Network button: Select Network if you have a network-attached library. There are two options 

from for a network-attached library, ACSLS or DAS. For more information on ACSLS and 
DAS, refer to the StorNext Release Notes.

• Vault button: Select Vault if your library stores media that has been moved from a robotic 

library. A Vault library is a library used only to store media and cannot be reconfigured after it 
has been designated as a vault.

Depending on the library type, refer to the appropriate procedure to add the library to StorNext. 

•

•

•

•

The Library Introduction screen shows the libraries that have been configured. 

Do one of the following:

• Select “Skip to adding Storage Disks” and follow the procedure in  

 on page 58. (You would want to skip the steps for adding a library, tape drives, 

and media if you plan to use only disk space for storage.) 

• Click Next and follow the procedure in 

 on page 36 to add a SCSI library.