ADIC Webcam 2.8 Manuel D’Utilisation
StorNext File System and Storage Manager Installation Guide
35
The Configuration Wizard screen (
on page 23) is shown with a Completed status
.
Step 3: Adding a Library
Use the procedure in this section to add libraries to StorNext. The StorNext Storage Manager (SNSM)
component of StorNext supports three types of libraries: SCSI, Network (ACSLS or DAS), and Vault.
component of StorNext supports three types of libraries: SCSI, Network (ACSLS or DAS), and Vault.
• SCSI button: Select SCSI if you have a SCSI or a fibre channel-attached library.
• Network button: Select Network if you have a network-attached library. There are two options
from for a network-attached library, ACSLS or DAS. For more information on ACSLS and
DAS, refer to the StorNext Release Notes.
DAS, refer to the StorNext Release Notes.
• Vault button: Select Vault if your library stores media that has been moved from a robotic
library. A Vault library is a library used only to store media and cannot be reconfigured after it
has been designated as a vault.
has been designated as a vault.
Depending on the library type, refer to the appropriate procedure to add the library to StorNext.
•
•
•
•
The Library Introduction screen shows the libraries that have been configured.
Do one of the following:
on page 58. (You would want to skip the steps for adding a library, tape drives,
and media if you plan to use only disk space for storage.)
on page 36 to add a SCSI library.