Dish DuoDVR ViP 722k User Manual

The YP

 (component) connections provide high-quality video to your HDTV or HD 

monitor.

1

Connect between the YP

 component connections on the receiver and the nearby TV 

using component video cables.

2

Connect audio (red and white) RCA-type cables between the receiver A

 and 

audio input connections that go with the YPbPr connectors on your HDTV or monitor.

3

If you do not see a picture, change the resolution setting on the receiver. Use the steps 
below and Setting Up to Display in HD on the next page.

4

Turn up the volume on your HDTV and confirm you have sound. Check the RCA-type 
connections if you don’t have sound.

This section will help you make a picture on the nearby TV in the event that you could not 
do so in the previous sections.

1

Connect RCA-type cable connections between the receiver TV1 O

 and the nearby TV. 

2

Make sure the receiver and nearby TV are on.

3

Make sure the nearby TV is set to use the RCA-type inputs. Look on the back of your 
HDTV and consult your HDTV user’s guide.

4

Change the HDTV settings as described on page 106.

5

Switch to the nearby TV to display from the HD inputs you selected in the previous 
sections. If you have a picture from TV1, you are finished.

6

Repeat steps 4 and 5 until the nearby TV displays video from the receiver.

1

3

4

2