Dish DuoDVR ViP 722k ユーザーズマニュアル
Connections and Setup
105
Connecting to the Nearby TV (TV1)
YPbPr Connections
The YP
B
P
R
(component) connections provide high-quality video to your HDTV or HD
monitor.
1
Connect between the YP
B
P
R
component connections on the receiver and the nearby TV
using component video cables.
2
Connect audio (red and white) RCA-type cables between the receiver A
UDIO
O
UTPUTS
and
audio input connections that go with the YPbPr connectors on your HDTV or monitor.
3
If you do not see a picture, change the resolution setting on the receiver. Use the steps
below and Setting Up to Display in HD on the next page.
below and Setting Up to Display in HD on the next page.
4
Turn up the volume on your HDTV and confirm you have sound. Check the RCA-type
connections if you don’t have sound.
connections if you don’t have sound.
No Picture on the Nearby TV
This section will help you make a picture on the nearby TV in the event that you could not
do so in the previous sections.
do so in the previous sections.
1
Connect RCA-type cable connections between the receiver TV1 O
UT
and the nearby TV.
2
Make sure the receiver and nearby TV are on.
3
Make sure the nearby TV is set to use the RCA-type inputs. Look on the back of your
HDTV and consult your HDTV user’s guide.
HDTV and consult your HDTV user’s guide.
4
Change the HDTV settings as described on page 106.
5
Switch to the nearby TV to display from the HD inputs you selected in the previous
sections. If you have a picture from TV1, you are finished.
sections. If you have a picture from TV1, you are finished.
6
Repeat steps 4 and 5 until the nearby TV displays video from the receiver.
1
3
4
Connect receiver
and monitor with
YPbPr Component
connections
Turn monitor
and receiver on
and confirm
picture
Confirm
sound and
volume
2
Connect receiver and
monitor with Audio cables
AUDIO
L
R