Digidesign Control 24 User Manual
Chapter 13: Plug-Ins and Inserts
111
To assign a plug-in to all tracks simultaneously:
1
Assign plug-ins as described above.
2
Before confirming the assignment, do one of
the following steps:
• While pressing the APPLY TO ALL CHAN-
NELS switch, press the flashing encoder
switch that corresponds to the insert posi-
tion being assigned.
switch that corresponds to the insert posi-
tion being assigned.
– or –
• While pressing the OPT(ALT)/ALL switch,
press the flashing encoder switch that cor-
responds to the insert position being as-
signed.
responds to the insert position being as-
signed.
The selected plug-in will be instantiated in the
same insert position across all channels.
same insert position across all channels.
To assign a plug-in to selected tracks:
1
Press the CHANNEL SELECT switches on the
channels you want to affect.
2
Assign plug-ins as described above.
3
Before confirming the assignment, do one of
the following steps:
• While pressing the APPLY TO ALL SE-
LECTED CHANNELS switch, press the
flashing encoder switch that corresponds
to the insert position being assigned.
flashing encoder switch that corresponds
to the insert position being assigned.
– or –
• While pressing the
OPT(ALT)/ALL+SHIFT/ADD switch, press
the flashing encoder switch that corre-
sponds to the insert position being as-
signed.
the flashing encoder switch that corre-
sponds to the insert position being as-
signed.
The selected plug-in will be instantiated in the
same insert position across all selected channels.
same insert position across all selected channels.
Editing Plug-Ins
Once a plug-in has been assigned to an insert
position, you can bring up the parameter pages
for editing. The INSERTS switch will access all
inserts on a channel, while the DYN and EQ
switches will access only dynamics and equal-
ization plug-ins, respectively.
position, you can bring up the parameter pages
for editing. The INSERTS switch will access all
inserts on a channel, while the DYN and EQ
switches will access only dynamics and equal-
ization plug-ins, respectively.
To edit any assigned plug-in with the INSERTS
switch:
switch:
1
Press the INSERTS switch on the channel con-
taining the plug-in you want to edit. The chan-
nel's inserts (if any) are listed in the scribble
strips.
nel's inserts (if any) are listed in the scribble
strips.
2
Press the encoder switch under the plug-in
you want to edit.
3
Press INSERTS/PARAMS.
4
The parameters of the plug-in are displayed on
the channel scribble strips, and are enabled for
adjusting.
adjusting.
5
Press the channel’s INSERTS switch, or press
INSERTS/PARAMS again, to exit the parameters
editing mode and return to the sends selection
mode.
editing mode and return to the sends selection
mode.
When scrolling through input, output, or in-
sert options, the currently selected assign-
ments will be indicated by a “>“symbol in
front of the assignment name.
sert options, the currently selected assign-
ments will be indicated by a “>“symbol in
front of the assignment name.