Digidesign Control 24 Manuale Utente

To assign a plug-in to all tracks simultaneously:

1  

Assign plug-ins as described above. 

2  

Before confirming the assignment, do one of 

the following steps:

• While pressing the APPLY TO ALL CHAN-

NELS switch, press the flashing encoder 
switch that corresponds to the insert posi-
tion being assigned. 

– or –

• While pressing the OPT(ALT)/ALL switch, 

press the flashing encoder switch that cor-
responds to the insert position being as-
signed. 

The selected plug-in will be instantiated in the 
same insert position across all channels. 

To assign a plug-in to selected tracks:

1  

Press the CHANNEL SELECT switches on the 

channels you want to affect.

2  

Assign plug-ins as described above. 

3  

Before confirming the assignment, do one of 

the following steps:

• While pressing the APPLY TO ALL SE-

LECTED CHANNELS switch, press the 
flashing encoder switch that corresponds 
to the insert position being assigned. 

– or –

• While pressing the 

OPT(ALT)/ALL+SHIFT/ADD switch, press 
the flashing encoder switch that corre-
sponds to the insert position being as-
signed. 

The selected plug-in will be instantiated in the 
same insert position across all selected channels.

Editing Plug-Ins

Once a plug-in has been assigned to an insert 
position, you can bring up the parameter pages 
for editing. The INSERTS switch will access all 
inserts on a channel, while the DYN and EQ 
switches will access only dynamics and equal-
ization plug-ins, respectively.

To edit any assigned plug-in with the INSERTS 
switch:

1  

Press the INSERTS switch on the channel con-

taining the plug-in you want to edit. The chan-
nel's inserts (if any) are listed in the scribble 
strips. 

2  

Press the encoder switch under the plug-in 

you want to edit. 

3  

Press INSERTS/PARAMS. 

4  

The parameters of the plug-in are displayed on 

the channel scribble strips, and are enabled for 
adjusting.

5  

Press the channel’s INSERTS switch, or press 

INSERTS/PARAMS again, to exit the parameters 
editing mode and return to the sends selection 
mode.