Manualsbrain.com
  1. Manuals
  2. Brands
  3. Digicom
  4. COMSPHERE 3911
  5. User Manual

Digicom COMSPHERE 3911 User Manual

Download
Page of 280
AT Command Set and S-Registers
14-13
3910-A2-GN32-40
September 1998
Table 14-2
(9 of 10)
391x Series AT Commands
AT
Command
DCP LCD
Command
Sequence
Description
\Dn
CTS Control.
\D0
Forced On. Forces CTS to always ON.
\D1
Standard RS232.
\D2
Wink When Disconnect. CTS is turned OFF for 1 to 2 seconds
upon a disconnect.
\D3
Follows DTR. The state of CTS follows the state of DTR.
\D4
Follows RTS. The state of CTS follows the state of RTS.
Configure\Edit\
DTE Interface
\Gn
Modem to Modem Flow Control.
\G0
Disable.
\G1
Enable.
Configure\Edit\
V42/MNP/Buffer
\Kn
Buffer Control, Send Break Control, Break Forces Escape.
Break Buffer
Send Break
Break Forces
Control:
Control:
Escape:
\K0
Discard Data
Break First
Enable
\K1
Discard Data
Break First
Disable
\K2
Keep Data
Break First
Enable
\K3
Keep Data
Break First
Disable
\K4
Keep Data
Data First
Enable
\K5
Keep Data
Data First
Disable
Break Buffer
Control:
Configure\Edit\
V42/MNP/
Send Break
Control:
Configure\Edit\
V42/MNP/Buffer
Break Forces
Escape:
Configure\Edit\
DTE Dialer
\Nn
Error Control Mode.
\N0
Buffer Mode.
\N1
Direct Mode.
\N2
MNP or Disconnect.
\N3
MNP or Buffer.
\N4
V.42/MNP or Disconnect.
\N5
V.42/MNP or Buffer.
\N6
LAPM_or_Disc
\N7
LAPM_or_Bufr
Configure\Edit\
V42/MNP/Buffer
\Qn
Flow Control of DTE, Flow Control of Modem.
Flow Control
Flow Control
of DTE:
of Modem:
\Q0
Disable
Disable
\Q1
XON/XOFF
XON/XOFF
\Q2
CTS to DTE
Disable
\Q3
CTS to DTE
RTS to Mdm
\Q4
XON/XOFF
Disable
\Q5
Disable
XON/XOFF
\Q6
Disable
RTS to Mdm
Configure\Edit\
V42/MNP/Buffer