DeLonghi Pinguino Air-to-Air PAC C100E Instruction Manual

7

C I

F

G R H

E

B

A

Q

P

O

D

N

L

M

A  ON/STAND-BY button
B  MODE selection button:
 

Air conditioning, dehumidifying, fan.

C  Fan speed selection button (HIGH/MED/LOW/AUTO)
D  Timer button
E   Programmed operation increase temperature/time button
F   Programmed operation decrease temperature/time button
G  Display Displays the temperature values set and the 

programmed operating time

H  Timer in operation indicator light
I/L/M/N Fan speed lights and AUTO lights
O  Fan mode light
P  Dehumidifying mode light
Q  Air conditioning mode light
R  Remote control receiver

NOTE: Never turn the air conditioner off by unplugging from the outlet. Always press the   button, then wait for a few minutes 
before unplugging.  This allows the appliance to perform a cycle of checks to verify operation.

Plug into an outlet. Two lines appear on the display 

 

indicating that the appliance is in stand-by. Press the ON/
STAND-BY button (A). When turned on, the air conditioner starts 
operating in the same mode as when it was turned off. Press the 
MODE button (B) until the light corresponding to the desired 
mode lights up: 
Light (Q)           : air-conditioning mode
Light (P)            : dehumidifying mode
Light (O)  

   :  fan mode

Ideal for hot muggy weather when you need to cool and 
dehumidify the room. To set this mode:   press the + (E) or - (F) 
buttons until the desired temperature is displayed 

 

.

Then select the fan speed by pressing the “ FAN ” button (C) until 
the light corresponding to the required fan speed lights up:
 

MAXIMUM SPEED to achieve the target temperature as 
rapidly as possible

 

MEDIUM SPEED reduces noise levels while maintaining a 
comfortable temperature 

 

LOW SPEED for silent operation and maximum energy 
efficiency

AUTO: the appliance automatically selects the most suitable fan 
speed in relation to the temperature set on the digital display 
and current room temperature.