Datacard Group RL90 User Manual
Prepare to print cards
RP90 Plus E and RL90 User Guide
17
Initialize the retransfer film
1
Press the RESET key on the
control panel.
control panel.
2
The LCD display reads
"Initialize OK?"
"Initialize OK?"
3
Use the up and down arrow
keys to select "2'nd Panel,
OK?" or "Next Panel, OK?"
— Press the ENTER key
keys to select "2'nd Panel,
OK?" or "Next Panel, OK?"
— Press the ENTER key
when "Initialize, OK?" is
displayed to initialize the
printer without winding the
film.
displayed to initialize the
printer without winding the
film.
— Press the ENTER key
when "2'nd panel, OK?" is
displayed and the printer
winds the retransfer film
two panels.
displayed and the printer
winds the retransfer film
two panels.
— Press the ENTER key
when "Next Panel, OK?"
is displayed and the
printer winds the film one
panel.
is displayed and the
printer winds the film one
panel.
Initialize the patch or topcoat material (optional RL90 laminator only)
You must initialize the laminate material each time it is changed.
To initialize the laminate, press RESET/K and then the ENTER key on the
laminator LCD panel.
laminator LCD panel.
Tips – Retransfer film
•
To avoid dirt and dust
particles that might adhere
to the film during loading,
(move) initialize the
retransfer film one or two
panels each time the film
cartridge is removed from
the printer.
particles that might adhere
to the film during loading,
(move) initialize the
retransfer film one or two
panels each time the film
cartridge is removed from
the printer.