Datacard Group RL90 User Manual
Prepare to print cards
16
RP90 Plus E and RL90 User Guide
Prepare to print cards
Initialize the ink ribbon
1
Press the RESET key on the
control panel.
control panel.
2
The LCD display reads
"Initialize OK?"
"Initialize OK?"
3
Use the up and down arrow
keys to select "2'nd Panel,
OK?" or "Next Panel, OK?"
— Press the ENTER key
keys to select "2'nd Panel,
OK?" or "Next Panel, OK?"
— Press the ENTER key
when "Initialize OK?" is
displayed to initialize the
printer without winding the
ribbon.
displayed to initialize the
printer without winding the
ribbon.
— Press the ENTER key
when "2'nd panel, OK" is
displayed and the printer
winds the ribbon two
panel sets.
displayed and the printer
winds the ribbon two
panel sets.
— Press the ENTER key
when "Next Panel, OK?"
is displayed and the
printer winds the ribbon
one panel set.
is displayed and the
printer winds the ribbon
one panel set.
Set the retransfer film type
1
Press the MENU key until
"Retransfer" is displayed.
"Retransfer" is displayed.
2
Press the ENTER key.
3
"Media Type" is displayed.
4
Use the up and down arrow
keys to select Std (1000/roll).
Selections of 250 and 750
are not available at this time.
keys to select Std (1000/roll).
Selections of 250 and 750
are not available at this time.
5
Press the ENTER key.
6
Press EXIT twice to return to
the "Ready" display.
the "Ready" display.
Tips – Ink ribbon
•
To avoid dirt and dust
particles that might adhere
to the ink ribbon during
loading, move (initialize)
the ink ribbon one or two
panels each time the ink
cartridge is removed from
the printer.
particles that might adhere
to the ink ribbon during
loading, move (initialize)
the ink ribbon one or two
panels each time the ink
cartridge is removed from
the printer.
Tips – Retransfer film
•
Set the retransfer film type
when you set up the
printer.
when you set up the
printer.
•
If you change the type of
film, set the type of
retransfer film you are
using.
film, set the type of
retransfer film you are
using.