Datacard Group RL90 User Manual

Cleaning the printer

48                    

RP90 Plus E and RL90 User Guide

Use saved packaging materials to prepare the printer and optional laminator 
for transport. Transport includes moving the printer from one location to 
another within the same facility.

Set the printer to transport mode using the LCD panel. See 

Power off the laminator (if used) and the printer.

Disconnect the power and data cables from the printer. 

Disconnect the power cable from the laminator (if used).

Disconnect the cable between the laminator and printer (if used).

Allow the unit(s) to cool down before preparing them for transport.

Remove cards from the printer card hopper.

Remove the printer ink ribbon cartridge and remove the ink ribbon from 
the cartridge. Replace the empty cartridge in the printer.

Remove the transfer film cartridge and remove the transfer film from 
the cartridge. Replace the empty cartridge in the printer.

Insert the head pad on the printer thermal head.

Remove the laminator cartridge and remove the laminator supply from 
the cartridge. 

Replace the laminator transport cushion and the empty cartridge in the 
laminator.

Close all doors, including the input hopper. 

Remove the output hopper.

Package each unit in the original shipping carton.