Datacard Group RL90 User Manual

50

The laminator cartridge can collect debris and dust during lamination and 
supply loading. Clean the cartridge every 1,000 cards.

Open the laminator door by pulling the top of the door toward you.

Press the laminator cartridge eject button to remove the laminator 
cartridge.

Remove the supply and take-up spools if present.

Clean the two cartridge guide shafts and the four metal guides with a 
lint free cloth and ethanol.

Clean the laminator guide rails and the cartridge opening.

Replace the supply and take-up spools on the cartridge. See 

Replace the loaded laminator cartridge in the laminator until it clicks 
into position.

Close the laminator door.

The laminator fan filter is designed to 
keep airborne particles from entering 
the unit. Clean the filter regularly and 
replace it when the foam begins to 
deteriorate.

Remove the filter from the back 
of the laminator by pulling the 
filter cover off.

Clean the filter carefully using a 
vacuum cleaner. Hold the foam 
filter in place to prevent it from 
being drawn into the vacuum.

Reinstall the filter.