Datacard Group RL90 User Manual

72                    

RP90 Plus E and RL90 User Guide

When choosing a site for the printer and its supplies, consider these 
guidelines:

•

Keep all dust, dirt, food, liquids, etc. away from the printer at all times.

•

Do not use supplies or cards that have been dropped on the floor or 
have otherwise become contaminated.

•

Keep paper and foreign materials off the printer.

•

Place the printer on a stable platform; keep it off the floor.

•

Place the printer away from direct sunlight.

•

Place the printer away from heating ducts, blowers, or other air vents.

•

Do not use the printer for purposes other than its intended use.

•

When cleaning around the printer, prevent debris from entering the 
printer.

•

Place the printer in a clean office environment, protected from any type 
of construction.

•

Store all supplies in the original packaging until you load them in the 
printer. Keep the original packaging closed.

•

Store all supplies in a clean, cool, and dry location.

The performance of the printer and optional laminator is strongly influenced 
by the installation location. Using the printer in areas below the recommended 
temperatures can cause retransfer errors, while using the printer in areas 
above the recommended temperatures can cause errors such as deformation 
and retransfer film errors. Consider the following recommendations if you 
need to move or relocate your printer.

Relative humidity: 35% to 70%
Temperature: 59° F to 86° F (15° C to 30° C)

Avoid locating the 
equipment in dirty or 
dusty environments.

Do not place in areas 
susceptible to strong 
vibration or shock.

Do not place the printer, 
optional laminator, or the 
supplies in direct 
sunlight.