Datacard Group RL90 User Manual

RP90 Plus E and RL90 User Guide

73

To ensure proper ventilation to the printer and laminator, maintain minimum 
clearance distances as shown.
Sides: 8” (20mm)
Back: 4” (10mm)

•

Keep paper and 
foreign 
materials off the 
printer.

•

Place  the 
printer on a 
stable platform

•

Do not place in 
areas 
susceptible to strong vibration or shock.

•

Keep all dust, dirt, food, liquids, etc. away from the printer at all times.

Follow these guidelines when storing supply rolls:

•

Store supplies in their original packaging until you are ready to use 
them.

•

Choose a location away from direct sunlight, with a temperature 
between 41° F and 77° F (5° C and 25° C) with a maximum of 40% to 
60% relative humidity.

•

Do not store supplies in direct sunlight or high humidity locations.

•

The print ribbon maintains its quality for about one year. For optimal 
card quality, purchase and store quantities that you can use up in less 
than a year. 

•

The print ribbon and card stock might require secure storage and 
tracking. Follow your policy for storing and tracking the supplies used 
to make cards. 

•

Supply rolls should be at room temperature when they are installed in 
the printer and used. If supplies are stored in a cooler environment 
than the printer, allow supplies to reach room temperature before 
using. 

•

If the printer will not be used for an extended period of time, remove 
supplies from the printer and store them with new supplies.