BMW 2009 X6 xDrive50i Owner's Manual

 133

The adaptive fixing system is used to divide up 
the cargo bay. It consists of two brackets with a 
telescopic rail and retaining straps. These are 
guided into the two rails on the cargo bay floor.

Before using the adaptive fixing system, 
fold up and lock the rear seat backrest; 

otherwise, the cargo could be thrown into the 
vehicle interior in an accident.

<

1 Brackets
2 Telescopic rail
3 Notch in the cargo bay rail

The two brackets are connected with a tele-
scopic rail.

1.

Insert the brackets at the respective notch 
in the rail on the cargo bay floor.

2.

Press down the brackets to push them into 
the desired position.

3.

Check the firm seating of the brackets. 
They must be clearly heard to engage.

Do not lay cargo on the brackets, as oth-
erwise they could be unlocked.

<

You can position the cargo as follows:

>

between the rear seat backrest and the 
telescopic rail

>

between the telescopic rail and the retain-
ing strap

Positioning cargo between telescopic rail and 
retaining strap:

1.

Lay the cargo on the telescopic rail. Press 
the button, arrow

1, and route the retaining 

strap around the cargo, arrow

2.

2.

Hook the retaining strap into the mount

3 

on the telescopic rail.

3.

Press the button of the bracket, arrow

1. 

The retaining strap is tensioned.

You can also hook both retaining straps 
into each other.

<

When you are finished using the adaptive fixing 
system, unhook the retaining strap and guide it 
back into the bracket in order to prevent dam-
age and injury. 
Then slide the fastening system toward the 
front in order to permit the best possible use of 
the cargo bay.

Press down the brackets, slide them up to the 
notches of the rails and remove them.
Depending on your vehicle's equipment pack-
age, you can store the adaptive fixing system 
under the floor panel in the cargo bay.

Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG