BMW 2009 X6 xDrive50i Owner's Manual
Replacing components
270
For bulbs for which replacement is not
described and for checking and adjusting
described and for checking and adjusting
headlamp aim, please contact your BMW
Sports Activity Vehicle Center.
Sports Activity Vehicle Center.
<
Light-emitting diodes LEDs
Light-emitting diodes installed behind translu-
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.
Do not remove the covers, and never
stare into the unfiltered light for several
stare into the unfiltered light for several
hours, as irritation of the retina could result.
<
BMW X5: changing lamps
Xenon light
These bulbs have a very long service life and
the probability of a failure is very low. If one of
these bulbs should nevertheless fail, it is possi-
ble to continue driving with great caution using
the fog lamps, provided traffic laws in your area
do not prohibit this.
the probability of a failure is very low. If one of
these bulbs should nevertheless fail, it is possi-
ble to continue driving with great caution using
the fog lamps, provided traffic laws in your area
do not prohibit this.
Have work on the xenon light unit includ-
ing changing the bulb carried out only by
ing changing the bulb carried out only by
your BMW Sports Activity Vehicle Center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the
system, there is a danger of fatal injuries when
work is carried out improperly.
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the
system, there is a danger of fatal injuries when
work is carried out improperly.
<
Halogen bulbs:
Parking lamps and roadside parking
Parking lamps and roadside parking
lamps, daytime driving lamps
35-Watt bulb, H8
The bulb is pressurized. Therefore, wear
safety glasses and protective gloves.
safety glasses and protective gloves.
Otherwise there is a danger of injuries if the
bulb is accidentally damaged during replace-
ment.
ment.
<
1.
Turn the cover to the left and remove.
2.
Turn the bulbs to the left, pull off the con-
nector and replace.
nector and replace.
3.
Install in the reverse order.
Turn signals, front
24-Watt bulb, PY24W
1.
Unscrew bulb holder with bulb to the left,
refer to arrow, and replace.
refer to arrow, and replace.
2.
Install in the reverse order.
Side marker lamps, rear
To replace, please go to a BMW Sports Activity
Vehicle Center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Vehicle Center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Tail lamps
>
Turn signals, brake lamps: 21-watt bulb,
P21W
P21W
>
Backup lamps and brake force display: 16-
watt bulb, W16W
watt bulb, W16W
>
Rear lamp: LED technology.
In case of a defect, please go to a BMW
In case of a defect, please go to a BMW
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG