BMW 2009 X6 xDrive50i Owner's Manual

 273

the fog lamps, provided traffic laws in your area 
do not prohibit this.

Have work on the xenon light unit includ-
ing changing the bulb carried out only by 

your BMW Sports Activity Vehicle Center or a 
workshop that works according to BMW repair 
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the 
system, there is a danger of fatal injuries when 
work is carried out improperly.

<

35-Watt bulb, H8

The bulb is pressurized. Therefore, wear 
safety glasses and protective gloves. 

Otherwise there is a danger of injuries if the 
bulb is accidentally damaged during replace-
ment.

<

1.

Turn the cover to the left and remove.

2.

Left side of vehicle:
Rotate the bulb holder to the right, refer to 
arrow, and remove.
Right side of vehicle:
Rotate the bulb holder to the left and 
remove.

3.

Disconnect plug and replace bulb.

4.

Install in the reverse order.

5-Watt bulb, WY5W XLL

1.

Rotate the bulb holder to the left and 
remove.

2.

Pull the bulb out of the bulb holder and 
replace.

3.

Install in the reverse order.

24-Watt bulb, PY24W

1.

Rotate bulb holder to the left and remove it 
along with the bulb.

2.

Rotate the bulb to the right along with the 
socket and replace.

3.

Install in the reverse order.

>

Turn signal, backup lamps: 21-watt bulb, 
H21W

>

Brake lamps, brake force display: 21-watt 
bulb, P21W

>

Rear lamp: LED technology. 
In case of a defect, please go to a BMW 
Sports Activity Vehicle Center or a work-

Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG