BMW 2009 X6 xDrive50i Owner's Manual

Opening and closing

The engine can only be started if the vehicle
detects that the remote control is located in
the vehicle.

Comparison with ordinary remote

control

You can control the functions mentioned previ-
ously with the comfort access or by pressing
the buttons on the remote control. Therefore,
please familiarize yourself with the information
on opening and closing beginning on page

beforehand.
The special features when using comfort
access are described in the following.

Should a short delay occur when opening
or closing the windows or the glass sun-

roof

/panorama glass sunroof

, the system

checks whether a remote control is located in
the vehicle. Please repeat opening or closing if
necessary.

Releasing

Completely grasp a door handle, arrow

This corresponds to pressing the

button.

Locking

Touch the area highlighted in the picture,
arrow

2, with your finger for approx. 1 second.

This corresponds to pressing the

but-

ton.

Please make sure that all electronic sys-
tems/consumers are switched off before

locking to save the battery.

Comfort closing

Hold a finger or the back of a hand on the sur-
face, arrow

The windows and the glass sunroof

/panorama

glass sunroof

are closed.

Watch during the closing process to be
sure that no one is injured. Removing the

hand from the door handle immediately stops
the closing process.

Opening liftgate

Press the button on the liftgate.
This corresponds to pressing the

button.

If a remote control accidentally left in the
cargo bay is detected in the locked vehi-

cle after the liftgate is closed, then the liftgate
opens again. The hazard warning flashers flash
and a signal

sounds.

Switching on radio readiness

By briefly pressing the Start/Stop button, you
switch on the radio readiness, refer to page

When doing so, do not depress the brake
pedal, otherwise the engine will start.

Starting engine

You can start the engine or switch on the igni-
tion if a remote control is located in the interior
of the vehicle. It need not be inserted in the igni-
tion lock, refer to page

As long as no remote control is detected in the
vehicle, it is only possible to restart the engine
within approx. 10 seconds after it is switched off
if no door has been opened.

Switching off engine

Remote control not in ignition lock:
After switching off the engine, the transmis-
sion is automatically switched into trans-
mission position P.

Remote control in ignition lock:
If transmission position N is engaged, the
transmission remains in this position after
the engine is switched off.