BMW 2009 X6 xDrive50i Owner's Manual

Page of 317
 41
Before driving into a car wash
The vehicle can roll if you proceed according to 
the following steps:
1.
Insert remote control into ignition lock.
2.
Depress brake pedal.
3.
Engage transmission position N.
4.
Release the parking brake.
5.
Switch off the engine.
6.
Leave the remote control in the ignition 
lock.
Malfunction
The comfort access function may malfunction 
due to local radio waves. Then open or close the 
vehicle with the buttons on the remote control 
or with a key. To start the engine following this, 
insert the remote control in the ignition lock.
The warning lamp in the instrument 
panel lights up when an attempt is 
made to start the engine: starting the 
engine is not possible. The remote control is 
not in the vehicle or has a malfunction. Take 
along the remote control into the vehicle or 
have it checked. Insert another remote control 
into the ignition lock if necessary.
The warning lamp in the instrument 
panel lights up when the engine is 
running: the remote control is no 
longer in the vehicle. After switching off the 
engine, the engine can only be started again 
within approx. 10 seconds if no door has been 
opened.
The indicator lamp in the instrument 
panel lights up and a message 
appears on the Control Display: 
Replace the battery of the remote control.
Replacing battery
The remote control for comfort access contains 
a battery which must be replaced if necessary.
1.
Remove integrated key from remote con-
trol, refer to page
2.
Remove cover.
3.
Lay in new battery with positive side facing 
upward.
4.
Press cover closed.
Dispose of used batteries at a collection 
point or at your BMW Sports Activity 
Vehicle Center.
<
Windows
To prevent injuries, exercise care when 
closing the windows and keep them in 
your field of vision until they are shut. 
Always take along the remote control when you 
leave the vehicle, otherwise children could, for 
example, operate the windows and injure them-
selves.
<
Opening, closing
>
Press switch to resistance point: 
The window continues to open as long as 
you keep the switch pressed.
>
Press switch beyond resistance point: 
The window opens automatically. Pressing 
the switch again stops the opening move-
ment.
You can close the windows in the same manner 
by pulling the switch.
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG