BMW 2009 X6 xDrive50i Owner's Manual

Technology for comfort, convenience and safety

PDC with visual warning

You can also have the system show distances
to objects on the Control Display. Objects that
are farther away are already shown there before
a signal tone sounds.
The setting is stored for the remote control cur-
rently in use.
If the vehicle is equipped with a rear view cam-
era, refer to Displays on page

iDrive, for operating principle refer to page

Press the

button.

This opens the start menu.

Press the controller to open the menu.

Select "Settings" and press the controller.

Select "Vehicle / Tires" and press the con-
troller.

Change to upper field if necessary. Turn the
controller until "Maneuvering aids" is
selected and press the controller.

Turn the controller until "View selection" is
selected and press the controller.

Select "PDC in main window only" and
press the controller.

The PDC screen is activated.

The display appears on the Control Display as
soon as PDC is activated.

System limits

Even with PDC, final responsibility for
estimating the distance between the

vehicle and any obstructions always remains
with the driver. Even when sensors are pro-
vided, there is a blind spot in which objects can
no longer be detected. The system's detection
of objects is also subject to the physical limits
that apply to all forms of ultrasonic measure-
ment, such as those encountered with tow bars
and trailer couplings, thin or wedge-shaped
objects etc. Low objects already displayed, e.g.
the curb, can also disappear from the detection
area of the sensors again before or after a con-
tinuous tone already sounds. Higher, protrud-
ing objects, e.g. ledges, cannot be detected.
For this reason, drive with care; otherwise, there
is a danger of personal injury or property dam-
age.
Loud sources of sound, inside and outside the
vehicle, could drown out the PDC signal tone.