BMW 2009 X6 xDrive50i Owner's Manual

 93

The rear view camera in the liftgate displays the 
area behind your vehicle on the Control Display.

Also check the traffic situation around the 
vehicle during parking and maneuvering 

with direct vision, as otherwise danger of an 
accident could result, for example, from road 
users or objects located outside the picture 
area of the rear view camera.

<

With the engine running, shift into reverse.

If the image of the PDC Park Distance 
Control appears on the Control Display, 

you can switch the image to the rear view cam-
era, refer to Displays on page

<

Press the button.
PDC is activated at the same time, refer to 
page

If the image of the PDC Park Distance 
Control appears on the Control Display, 

you can switch the image to the rear view cam-
era, refer to Displays on page

<

When driving forward at over approx. 12 mph/
20 km/h or after driving approx. 164 ft/50 m.

Press the button again; the LED goes out.

The following functions can improve the effect 
of the rear view camera depending on the situa-
tion.
They can only be activated when the liftgate is 
completely closed.

The pathway lines are shown in the picture of 
the rear view camera. They help you to estimate 
the space required when parking and maneu-
vering on level roads.

The pathway lines are dependent on the current 
steering angle and are continuously adjusted to 
the steering wheel movements.

The static turning lines are displayed in the pic-
ture of the rear view camera and show you the 
course of the smallest possible turning circle on 
level roads.

Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG