BENDIX TCH-020-017 Leaflet

Technical

Bulletin

Bulletin No:

Effective Date:

Cancels:

Page: 1 of

Subject:

TCH-020-017

12-11-2008

N/A

Bendix

4709EII

Remanufactured Brake Shoe

Reason for this notice:
This is to inform you of a packaging issue involving a limited number of Bendix

brand 4709EII brake shoe

products available from Bendix Spicer Foundation Brake LLC.

Bendix Spicer Foundation Brake LLC has identifi ed that a limited number of improperly modifi ed 4709E (1st
generation) brake shoe cores entered our inventory and were packaged as Bendix

4709EII (2nd generation)

brake shoes.

The Bendix

4709EII remanufactured brake shoe products were distributed by Bendix Spicer Foundation

Brake between October 22, 2008 and November 6, 2008 (inclusive) and may contain one or more of the
impacted shoes. Potentially impacted remanufactured Bendix

4709EII brake shoe part numbers can be

included in the part numbers listed below.

How to identify the correct product:
The Bendix

OEM 4709EII brake shoe will have a retainer spring mounting hole diameter of 7/16” and both

ends of the shoe table will be cut square (no tabs on the anchor end of the table for retainer springs or the
cam end of the table in the center). See the illustration below for a more details.

EX4709E223KPREM KE4709E220KPREM RRK4709E2ECN20 RRK4709E2STD23

EX4709EIIBLK

KE4709E223KPREM RRK4709E2PR20

RRS4709E2PR23

EX4709EIIORG

KT4709EIIBLK

RRK4709E2PR23

RRS4709E2STD23

EX4709EIIRED

KT4709EIIRED

RRK4709E2STD20

Cam and Anchor Ends of Shoe

Table are Straight (no tabs).

Retaining Spring

7/16” Diameter

Retainer Spring Mounting Hole

- Locates the Spring on the Center

Line of the Anchor Pin

(Return) Release

Spring

Bendix

OEM 4709EII Lined Brake Shoe