Brother MFC-9660 User Manual

The machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting 
to PULSE by following the steps below.

Press Menu, 1, 9. The screen prompts you to select PULSE (or TONE).

Use 

 or 

 to select the dialling mode.

Press Set when the screen displays the dialling mode you want.

Press Stop/Exit.

You can set the machine to recognize the optional lower tray. When Lower Tray is set to ON, you can 
set which tray you want to use for faxes or for copies. For printer setting, see Paper Source, page 67.

After setting up the optional paper tray, press Menu, 2, 0, 2.

Press 

 or 

 to turn ON (or OFF).

Press Set.

When the optional LOWER TRAY is set to ON, you can set the tray usage.

The default setting of AUTO allows the machine to choose the lower tray if paper is out in the upper 
tray. Choose UPPER or LOWER if you want to keep special paper in the other tray and control 
when it is used.

To set tray usage for faxes, press 

 or 

 to select FOR FAX, and then press Set.

—OR—
To set tray usage for copies, press 

 or 

 to select FOR COPY, and then press Set.

Press 

 or 

 to select AUTO, UPPER or LOWER and press Set.

Press Stop/Exit.