Bosch Appliances Smoke Alarm D7024 User Manual
D7024
Panel Programming
D7024 Operation and Installation Guide
41740F
Page 66
© 2005 Bosch Security Systems
7.6.4 Ring
Count
Shortcut: 0-
PROG
, 6-
PROG ACC’NTS
, 4-
RING COUNT
It is recommended that the number of phone rings before the panel will seize the line to attempt
remote programming be left set to “0”.
remote programming be left set to “0”.
The following window will display:
RING COUNT
(01-15, 00=DIS) ___
(01-15, 00=DIS) ___
Enter the information and press [#/Cmnd]. The previous window will be displayed. An entry of [0] + [0] will disable ring
detection.
detection.
7.6.5 Communication
Tries
Shortcut: 0-
PROG
, 6-
PROG ACC’NTS
, 5-
COMM. TRIES
The system will always attempt ten times to communicate an event. The parameter determines after which attempt the
system will indicate a failure condition. Do not select 1 as a failure will be indicated whenever a report is sent.
system will indicate a failure condition. Do not select 1 as a failure will be indicated whenever a report is sent.
The following window will display:
COMM ATTMPTS (__)
(01-10): __
(01-10): __
Enter the information and press [#]. The previous window will be displayed.
7.6.6 Machine
Bypass
Shortcut: 0-
PROG
, 6-
PROG ACC’NTS
, 6-
MACH BYPASS
The downloading computer can dial back to connect for downloading if an answering machine answered the phone before
the control. When this option is selected, if the control detects the phone line ringing within one minute of when the last
ringing cycle stopped, then it will answer on the first ring and seize the phone line.
the control. When this option is selected, if the control detects the phone line ringing within one minute of when the last
ringing cycle stopped, then it will answer on the first ring and seize the phone line.
The following window will display:
MACHINE BYPASS
____: YES (1) NO (0)
____: YES (1) NO (0)
Enter the information and press [#]. The previous window will display.