Bosch Appliances Security Camera NBC-265-W User Manual

112 en | Advanced Mode

IP Camera 200 Series

AR18-10-B012 | v1.54 | 2011.08

Installation and Operation Manual

Bosch Security Systems

deactivates all unencrypted connections allowing connections 

on the HTTPS port only.

Activating RCP+ port 1756 allows unencrypted connections on 

this port. To allow only encrypted connections, set the Off 

option to deactivate the port.

Activating Telenet support allows unencrypted connections on 

this port. To allow only encrypted connections, set the Off 

option to deactivate telnet support, making telnet connections 

impossible.

If necessary, select the Ethernet link type for interface ETH. 

Depending on the device connected, it may be necessary to 

select a special operation type.

Set the maximum segment size for the IP packet's user data 

here. This gives the option to adjust the size of the data packets 

to the network environment and to optimize data transmission. 

Please comply with the MTU value of 1,514 bytes in UDP mode.

Specify a higher MSS value for a connection to the iSCSI 

system than for the other data traffic via the network. The 

potential value depends on the network structure. A higher 

value is only useful if the iSCSI system is located in the same 

subnet as the camera.

DynDNS.org is a DNS hosting service that stores IP addresses in 

a database ready for use. It allows selecting the device via the 

Internet using a host name, without having to know the current 

IP address of the device. Enable this service here. To do this, 

obtain an account with DynDNS.org and register the required 

host name for the device on that site.