Bosch Appliances Security Camera NBC-265-W User Manual

IP Camera 200 Series

Advanced Mode | en 117

Bosch Security Systems

Installation and Operation Manual

AR18-10-B012 | v1.54 | 2011.08

Duplication of data places a heavy demand on the CPU and can 

lead to impairment of the image quality under certain 

circumstances.

Enter the port address for the stream here.

Click the checkbox to activate multicast streaming mode. An 

activated stream is marked with a check. (Streaming is typically 

not required for standard multicast operation.)

A value can be entered to specify how long the multicast data 

packets are active on the network. If multicast is to be run via a 

router, the value must be greater than 1.

Save individual JPEG images on an FTP server at specific 

intervals. If required, retrieve these images at a later date to 

reconstruct alarm events. JPEG resolution corresponds to the 

highest setting from the two data streams.

Select how file names are created for the individual images that 

are transmitted.

–

Overwrite: The same file name is always used and any 

existing file will be overwritten by the current file.

–

Increment: A number from 000 to 255 is added to the file 

name and automatically incremented by 1. When it reaches 

255, it starts again from 000.

–

Date/time suffix: The date and time are automatically 

added to the file name. When setting this parameter, 

ensure that the date and time of the device are always set 

correctly . For eample, the file snap011005_114530.jpg 

was stored on October 1, 2005 at 11.45 and 30 seconds.

Enter the interval in seconds at which the images are sent to an 

FTP server. Enter zero for no images to be sent.