Bosch Appliances Security Camera NBC-265-W User Manual

IP Camera 200 Series

Advanced Mode | en 115

Bosch Security Systems

Installation and Operation Manual

AR18-10-B012 | v1.54 | 2011.08

If necessary, select a different port for the exchange of the 

RTSP data from the list. The standard RTSP port is 554. Select 

Off to deactivate the RTSP function.

Select On to activate UPnP communication. Select Off to 

deactivate it.

When UPnP is activated the camera reacts to requests from the 

network and is registered automatically as a new network 

device on the inquiring computers.

To use the UPnP function on a computer with Windows XP or 

Windows Vista, the Universal Plug and Play Device Host and the 

SSDP Discovery services must be activated

This function should not be used in large installations due to 

the large number of registration notifications.

The device can receive data from an external TCP sender, for 

example an ATM or POS device, and store it as metadata. 

Select the port for TCP communication. Select Off to 

deactivate the function. Enter a valid Sender IP address.

To use a wireless LAN connection proceed as follows:

1.

To activate the wireless LAN connection select Auto from 

the drop down box.

2.

Select your region in the Region code drop down box.

3.

If you know the service set identifier enter it in the SSID 

box. If you do not know, click Scan to see a list of available 

services and then click a service.

4.

Enter the encryption key to get access to the network in 

the PSK box

. Reboot and remove Ethernet cable immediately.

To enhance network security, only WPA-PSK (TKIP) and WPA2-

PSK (AES) encryption is supported.