Bosch Appliances Security Camera 5000 User Manual

en | Connection and set-up

FLEXIDOME 5000 AN

AM18-Q0648 | v1.0 | 2013.03

Installation Manual

Bosch Security Systems

When the camera position is set and all adjustments have been 

made, close the unit.

1.

Place the inner liner (with attached sealing ring) in 

position, aligning its fin with the bracket on the base.

2.

Place the dome onto the base and rotate until it clips into 

place. (If necessary clean its surface with a soft cloth.)

3.

Place the trim ring over the dome.

4.

Align the tamper-resistant screws in the trim ring with the 

threaded ends in the mounting base.

5.

Use the special screwdriver bit supplied to tighten the 

three tamper-resistant screws.