Bosch ATM/POS Bridge User Manual
Bosch Security Systems
ATM/POS bridge | Installation Manual
EN |
5
English
1.5 Connections
Using the supplied cables, connect the bridge as follows:
1. Connect the supplied DC power adapter unit to the DC power input connector of
the bridge.
2. Connect the RJ45 connector of the bridge via a straight Ethernet CAT5 network
cable to a network switch or hub that supports 10BaseT. Alternatively, the bridge can
be connected directly to the digital video recorder via a cross-over cable.
be connected directly to the digital video recorder via a cross-over cable.
3. To configure the bridge, use an RS232 cable to connect the COM3 (console) port to
the serial port of a PC. If you use the RS232 console cable supplied with the bridge,
ensure that the bridge is powered before connecting the cable.
ensure that the bridge is powered before connecting the cable.
Ethernet RJ45 connector
DC Power input connector
COM 3 (console) RS232 connector
COM 2 RS232 connector
COM 1 RS232 connector
COM 4 RS485 connector
Activity indicator