Bosch ATM/POS Bridge User Manual
Bosch Security Systems
ATM/POS bridge | Installation Manual
EN |
7
English
2.
Configuration
The ATM/POS bridge is configured via a PC HyperTerminal session. The PC is
connected via a COM serial port to the COM 3 (console) port of the bridge. Start a
HyperTerminal session on the PC to get access to the configuration menu of the bridge.
connected via a COM serial port to the COM 3 (console) port of the bridge. Start a
HyperTerminal session on the PC to get access to the configuration menu of the bridge.
2.1 How to set up a HyperTerminal session
1. Start the PC HyperTerminal program in Windows (normally available under
Start_Programs_Accessories_Communications).
2. Enter a name for the HyperTerminal session and click OK.
3. For the connection, select the COM port number of the PC.
4. Fill in the following values for the COM port properties and click OK:
3. For the connection, select the COM port number of the PC.
4. Fill in the following values for the COM port properties and click OK: