Bosch Appliances Network Card D8125INV User Manual

D8125INV 

Installation 

49690E 

Page 18 

© 2005 Bosch Security Systems 

  

 

3.6.1.2  Menu 1: Add, Edit or Delete RF Transmitter 

This menu is used to add/edit/delete RF transmitters to the D8125INV and to configure them. 

The display for adding, editing or deleting an RF Transmitter is the same. 
Figure 15 shows an example of the display. 

1.

 

The point address of the RF Transmitter. 

2.

 

The mode the RF Transmitter is in (see Section 3.6.1.1 Point 
Mode, p.17 for more information). 

3.

 

The current check-in selection for that specific RF 
Transmitter (see Section 3.6.1.3 Adding a new RF Transmitter, 
p.18). 

 

4.

 

This line is used to display the key options for this transmitter (see Section 3.6.1.3 Adding a new RF 
Transmitter, p.18). 
<command scroll> = “Push 1 to edit” displays for 3 seconds, “2 to delete” displays for 3 seconds, “3 to 
program” displays for 3 seconds or “ESC to exit” displays for 3 seconds 

Adding new 

•

 

adding new transmitter(s) 

•

 

programming transmitter(s) and adding to 
D8125INV 

•

 

to change mode and/or check-in time of 
transmitter(s) 

Section 3.6.1.3 Adding a new 
RF Transmitter, p.18 

Adding existing 

•

 

adding the point to D8125INV without 
reprogramming the transmitter(s) 

•

 

replacing the D8125INV without reprogramming 
the transmitter(s) 

Section 3.6.1.3 Adding an 
existing RF Transmitter, p.20 

Deleting 

•

 

deleting transmitter(s) from the D8125INV 

Section 3.6.1.4 Deleting an 
RF Transmitter, p.21 

3.6.1.3  Adding a new RF Transmitter 

To add an RF transmitter, follow the steps below: 

1. 

Complete the steps in Section 3.6.1 Beginning steps to add/edit/delete an RF Transmitter, p.16. 

2. 

After the point number has been entered, the keypad will display: 

3. 

Push [1] to edit the transmitter if the displayed values need to be 
modified. If not, proceed to step 8. 

 

 

 

 

4. 

The display will change to the following: